Sampling port for real-time analysis of bioaerosol in whole body exposure system for animal aerosol model development.

INTRODUCTION: Multiple factors influence the viability of aerosolized bacteria. The delivery of aerosols is affected by chamber conditions (humidity, temperature, and pressure) and bioaerosol characteristics (particle number, particle size distribution, and viable aerosol concentration). Measurement of viable aerosol concentration and particle size is essential to optimize viability and lung delivery. The Madison chamber is widely used to expose small animals to infectious aerosols. METHODS: A multiplex sampling port was added to the Madison chamber to measure the chamber conditions and bioaerosol characteristics. Aerosols of three pathogens (Bacillus anthracis, Yersinia pestis, and Mycobacterium tuberculosis) were generated under constant conditions and their bioaerosol characteristics were analyzed. Airborne microbes were captured using an impinger or BioSampler. The particle size distribution of airborne microbes was determined using an aerodynamic particle sizer (APS). Viable aerosol concentration, spray factor (viable aerosol concentration/inoculum concentration), and dose presented to the mouse were calculated. Dose retention efficiency and viable aerosol retention rate were calculated from the sampler titers to determine the efficiency of microbe retention in lungs of mice. RESULTS: B. anthracis, Y. pestis, and M. tuberculosis aerosols were sampled through the port. The count mean aerodynamic sizes were 0.98, 0.77, and 0.78 µm with geometric standard deviations of 1.60, 1.90, and 2.37, and viable aerosol concentrations in the chamber were 211, 57, and 1 colony-forming unit (CFU)/mL, respectively. Based on the aerosol concentrations, the doses presented to mice for the three pathogens were 2.5e5, 2.2e4 and 464 CFU. DISCUSSION: Using the multiplex sampling port we determined whether the animals were challenged with an optimum bioaerosol based on dose presented and respirable particle size.

Experimental infection of cynomolgus macaques (Macaca fascicularis) with aerosolized monkeypox virus.

Monkeypox virus (MPXV) infection in humans results in clinical symptoms very similar to ordinary smallpox. Aerosol is a route of secondary transmission for monkeypox, and a primary route of smallpox transmission in humans. Therefore, an animal model for aerosol exposure to MPXV is needed to test medical countermeasures. To characterize the pathogenesis in cynomolgus macaques (Macaca fascicularis), groups of macaques were exposed to four different doses of aerosolized MPXV. Blood was collected the day before, and every other day after exposure and assessed for complete blood count (CBC), clinical chemistry analysis, and quantitative PCR. Macaques showed mild anorexia, depression, and fever on day 6 post-exposure. Lymphadenopathy, which differentiates monkeypox from smallpox, was observed in exposed macaques around day 6 post-exposure. CBC and clinical chemistries showed abnormalities similar to human monkeypox cases. Whole blood and throat swab viral loads peaked around day 10, and in survivors, gradually decreased until day 28 post-exposure. Survival was not dose dependent. As such, doses of 4 × 10(4) PFU, 1 × 10(5) PFU, or 1 × 10(6) PFU resulted in lethality for 70% of the animals, whereas a dose of 4 × 10(5) PFU resulted in 85% lethality. Overall, cynomolgus macaques exposed to aerosolized MPXV develop a clinical disease that resembles that of human monkeypox. These findings provide a strong foundation for the use of aerosolized MPXV exposure of cynomolgus macaques as an animal model to test medical countermeasures against orthopoxviruses.

Determination of antibiotic efficacy against Bacillus anthracis in a mouse aerosol challenge model.

An anthrax spore aerosol infection mouse model was developed as a first test of in vivo efficacy of antibiotics identified as active against Bacillus anthracis. Whole-body, 50% lethal dose (LD50) aerosol challenge doses in a range of 1.9x10(3) to 3.4x10(4) CFU with spores of the fully virulent Ames strain were established for three inbred and one outbred mouse strain (A/J, BALB/c, C57BL, and Swiss Webster). The BALB/c strain was further developed as a model for antibiotic efficacy. Time course microbiological examinations of tissue burdens in mice after challenge showed that spores could remain dormant in the lungs while vegetative cells disseminated to the mediastinal lymph nodes and then to the spleen, accompanied by bacteremia. For antibiotic efficacy studies, BALB/c mice were challenged with 50 to 100 LD50 of spores followed by intraperitoneal injection of either ciprofloxacin at 30 mg/kg of body weight (every 12 h [q12h]) or doxycycline at 40 mg/kg (q6h). A control group was treated with phosphate-buffered saline (PBS) q6h. Treatment was begun 24 h after challenge with groups of 10 mice for 14 or 21 days. The PBS-treated control mice all succumbed (10/10) to inhalation anthrax infection within 72 h. Sixty-day survival rates for ciprofloxacin and doxycycline-treated groups were 8/10 and 9/10, respectively, for 14-day treatment and 10/10 and 7/10 for 21-day treatment. Delayed treatment with ciprofloxacin initiated 36 and 48 h postexposure resulted in 80% survival and was statistically no different than early (24 h) postexposure treatment. Results using this mouse model correlate closely with clinical observations of inhalational anthrax in humans and with earlier antibiotic studies in the nonhuman primate inhalational anthrax model.

The automated bioaerosol exposure system: preclinical platform development and a respiratory dosimetry application with nonhuman primates.

INTRODUCTION: Well-characterized inhalation exposure systems are critical for preclinical testing and pathogenesis studies. The automated bioaerosol exposure system (ABES) provides a microprocessor-driven inhalation platform that provides exquisite data acquisition and control over all aspects of inhalation exposures. Because this represents a new technology, the development and characteristics of the ABES are thoroughly discussed. In addition to control over homeostatic and aerosol conditions, the ABES incorporates a dosimetry function based on respiratory performance of the test animal during inhalation. METHODS: To test the system, rhesus macaques were initially sham-exposed using the ABES in a head-only inhalation configuration. The ABES was subsequently used under biosafety level (BSL)-III conditions in a vaccine efficacy challenge using aerosolized staphylococcal enterotoxin B (SEB) toxin, again using the real-time dosimetry function of the system. RESULTS: Sham exposure results indicated significant departures from corresponding whole-body plethysmography (WBP) respiratory function estimates taken before the inhalation procedure. The results of the SEB exposure demonstrated the utility of using the ABES to generate consistently accurate and precise inhalation dose. DISCUSSION: Taken together, the results of the sham and toxin challenge experiments demonstrate that the dosimetry function of the ABES improves the precision and accuracy of inhaled dose delivery and calculation as compared to predictive WBP conducted before the exposure. The ABES represents a highly adaptable platform for the design of inhalation systems to suit the requirements of a variety of animal models.

Impact of inhalation exposure modality and particle size on the respiratory deposition of ricin in BALB/c mice.

Ricin is a toxic lectin derived from the seed of Ricinus communis (castor plant). It is lethal in small quantities when disseminated as an aerosol. We determined the impact of using two types of exposure chambers and different particle sizes on the deposition of ricin aerosols in mice. Initially, two types of inhalation exposure chambers (whole-body [WB] or nose-only [NO]) were compared using the same size aerosol (1 micro m) to determine the potential impact upon respiratory deposition and presented dose. We then assessed the role of particle size on deposition by using aerosols with two distinctly sized particle distributions. Selected organs were collected at four time points after exposure and were analyzed by quantitative enyzme-linked immunosorbent assay (ELISA) and epifluorescence microscopy. Results of the exposure chamber comparison, using 1- micro m particles only, indicated approximately 50% of the total ricin in the 4 organs was detected in the lung tissue 1 h after exposure. The trachea and nasopharyngeal region of the animals exposed using the WB chamber contained significantly more ricin than those of animals exposed in the NO chamber. Histopathology indicated an accumulation of ricin in both the tracheobronchial and pulmonary regions with pronounced bronchiolar degradation 48 h postexposure. When particles larger than 3 micro m were used, results indicated a considerable amount of ricin initially detected in the trachea, although this finding was discounted due to the heterodispersity of the particles generated. Interestingly, no animals died as a result of exposure to the equivalent of 4 LD50s (as determined using a 1- micro m particle) when exposed to the larger size distribution of particles. This result indicates a differential lethality that is contingent upon aerosol size.